Начиная с II пункта инструкция подходит ТОЛЬКО для M1 Note, т.к. идентификатор у всех моделей разный и наверняка лежит в другом разделе нежели как у M1 Note (mmcblk0p1), который нужно так же по-другому редактировать. Информацию о нём узнавайте в соответствующих темах с вашей моделью телефона! А вот и сама инструкция для M1 Note:I. Подготовка1) Получаем ROOT права2) Скачиваем и устанавливаем программу SuperSu (https://yadi.sk/d/ZY4ckPpkkPkRD), открываем, обновляем бинарный файл3) Ставим Android Terminal Emulator (https://yadi.sk/d/ZtztEdw_kPkRF)4) Включаем отладку по USBII. Создание бэкапа файла proinfo1) Запускаем Android Terminal Emulator, вводим "su" (без кавычек), нажимаем Enter, даём Root доступ.2) Далее вводим:"dd if=/dev/block/mmcblk0p1 of=/sdcard/proinfo.img" (без кавычек)III. Редактирование proinfo.img1) Берем файл proinfo.img из корня flash памяти и делаем копию (на всякий случай)2) Открываем оригинал любым HEX редактором, например Hex Editor для Андроид (https://yadi.sk/d/JfKiOf7GkPkQx)3) Open Hex Editor, click on the gear, put a tick, thereby giving Root access program.4) Next, click on the magnifying glass, put the point on ASCII, drives into the search box 463, click OK.5) Find string with a combination of 46,311,401, changing the 4 digit from 1 to 5 (on tykaem 31, change to 35) and save the file (click on on't go), should be 46,351,401IV. Recovery of proinfo.img1) Run Android Terminal Emulator, type "su" (without the quotes)2) now enter:"dd if =/sdcard/proinfo.img of =/dev/block/mmcblk0p1" (without the quotes)3) Writes that the file was successfully moved. Everything you can Flash on (I) the normal way (firmware http://goo.gl/SHdBOJ)4) Profit!
การแปล กรุณารอสักครู่..